Kema PG 600 Primer is a fast-setting rubber based liquid adhesive specifically designed to increase the adhesion of a variety of sealants and tape wraps.
KEMA PG 600 PRIMER
Kema Series 60 is a unique hybrid pipeline tape wrap providing 60mils (1524µm) thick enhanced polyisobutylene base sealant with a 5mil (127µm) UV stable pre-bonded polyethylene backing.
When applied at the recommended 50% overlap this pipeline tape system provided a total of 120mils (3048µm) of sealant with 2 preboned layers of structural polyethene protection.
The Kema Series 60 adhesion bond strength to primed steel far exceeds CSA Z245.30 system FC4 & FC7 standards with >1975 psi pull off (136 bar) adhesion while still leaving a layer of protective sealant during destructive adhesion testing.
KEMA SERIES 60
Kema 250-12 utilizes the same PIB sealant technology as the Kema 250 with the addition of a pre-bonded 12mils (300µm) UV stable polyethene backing eliminating the need for an additional PE or PVC wrap.
This hybrid viscoelastic tape wrap combines the performance of a CSA system FC4 & FC7 together in a single product.
Kema 250-12 exhibits similar self-healing characteristics of traditional viscoelastic products but with the added protection of nearly double the thickness of sealant and significantly increased adhesion to the substrate.
KEMA 250-12
Kema 250 is a PIB base coat consisting of an industry leading thickness of 250 mils / 6.5mm adhesion enhanced polyisobutylene module sealant.
It’s easily moldable into any irregular shape imaginable, is UV stable, can handle low and high heat installations up and can be stacked for added protection and assist in filling voids and caps in your piping system, exterior tank chime caps or as an insulating layer for protecting protrusions such as those seem on Thermite welds and Pin Brazes.
Kema 250
EXTEND LIFESPAN OF CRITICAL INFRACTRUCTURE
Manufactured with proprietary technology, Kema Sealants offer a robust, flexible, and environmentally responsible solution that ensures the integrity and extended lifespan of your critical infrastructure.
SUPERIOR ADHESION
Kema Module Sealants & Tapes are unique polyisobutylene enhanced adhesion formula, with a pre-bonded polyethylene protective backing, eliminates the need for an Outerwrap of PE or PVC as required by many traditional viscoelastic products, reducing cost and installation time on the job site.
LONG-TERM DURABILITY
Safe, non-toxic, environmentally friendly, and easy to use, Kema Module Sealants & Tapes are non-crystalline hybrid viscoelastic barrier coatings designed for long lasting corrosion protection.
Kema 250
Kema 250-12
Kema SERIES 60
Kema PG 600 Primer
For over 30 years, KEMA COATINGS is a leading innovator of Modular Sealants and Tapes for Pipeline, Marine, and Refining Industries.
Our advanced, self-healing, polyisobutylene-based, non-crystalline hybrid-viscoelastic coatings, aggressively bonds to the substrate, creating an impervious protective film against moisture, oxygen, and corrosive elements.
